Introduction of Huaxing Video G1 Camera Module

G1 camera module, which is a full-featured camera module combination developed by Huaxing Video based on the V39M chip of Xinding Technology iCatch, includes Camera core mainboard (equipped with iCatch V39M chip), Camera module (including lens, sensor), and an additional WIFI expansion board / network expansion board can be superimposed according to the demand.

G1 camera module is connected by using board-to-board socket or using extremely thin coaxial line to connect the camera mainboard, camera module and WIFI expansion board / network expansion board into a 2-layer or 3-layer PCBA combination. According to the combination of different camera modules and expansion boards, multiple G1 camera modules can be combined. The following figure shows 8 G1 camera module combinations with different modules and expansion boards:

In addition to the IMX377 camera module, IMX258 optical image stabilization camera module and OV 12D40 three-axis image stabilization gimbal camera module matched above, the G1 camera module also supports matching with many other camera modules, using different CMOS sensors and lenses.

The camera core mainboard, camera module and WIFI expansion board / network expansion board cannot work alone and need to be combined together to work. For example, mainboard + module, mainboard + module + expansion board can work; mainboard + expansion board, module + expansion board cannot work.

For the detailed function introduction of each G1 camera module, you can enter "Solution Center" to learn more details.

G1 camera module can work directly after power-on (if card recording is required, the memory card needs to be inserted first), such as being used as a PCCAM camera to connect to the computer for outputting images, without driver, without secondary development and without settings. G1 camera module does not contain the shell, and the shipped product is the PCBA combination form as shown in the picture. If a shell is needed, the shell designed by Huaxing Video can be additionally matched for assembly.