4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
    • 1/5
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]
  • 4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]

4K Action Camera Module WiFi Camera [DIY Camera - G1A WiFi Edition]

QR code
share
WeChat
copy Link
DIY Camera G1A WiFi Edition - equipped with the iCatch V39M chip and a Sony IMX377 image sensor, supports 4K resolution, 12MP, EIS (Electronic Image Stabilization), integrated Wi-Fi, USB, HDMI, a UART serial port, and a DC power interface.
SOC/DSP Main Controller iCatch V39M
Image Sensor IMX377 1/2.3 (12M)
Video Recording Resolution 4K 3840*2160 60/50/48/30/25/24p 2.7K 2704*1520 60/50/48/30/25/24p 1080P 1920*1080 120/60/50/48/30/25/24p
Photo Resolution 1200万
Memory Card 4GB - 512GB (Class10/U1/U2/U3)
Anti-shake Function Digital anti-shake, EIS anti-shake
Lens Parameters 100-degree zero-distortion wide-angle lens
USB Function USB读卡数据、USB摄像头、USB复用Uart串口
WiFi Function Support 2.4G OR 5G
HDMI Output Support
Display Screen Optional
PCB Board Size 38*38mm
Audio Support audio recording function
Scan to chat on What
Detail

DIY Camera - G1A Wifi Edition (Camera Mainboard + IMX377 Camera Module+Wifi Board）


1. Product Overview


The DIY Camera G1A WiFi Edition is equipped with an iCatch V39M camera mainboard, an IMX377 camera module and Wifi Board, interconnected via a board-to-board connector.


This DIY camera system is built around the iCatch V39M chip, supporting H.264 video encoding at up to 4K@60FPS (interpolated), 4K@30FPS, 2.7K@60FPS, and 1080P@120FPS. The camera module utilizes a high-quality SONY IMX377 CMOS sensor with an effective 12-megapixel resolution, paired with a 100-degree distortion-free wide-angle lens, and features multi-axis EIS (Electronic Image Stabilization) for enhanced image stability. Equipped with the AW CM256SM single-stream dual-band Wi-Fi module, it supports wireless connectivity operating on either the 2.4GHz or 5GHz band.


The board integrates a Type-C interface, HDMI port, TF card slot (supporting up to 512GB), battery interface, two control buttons, a digital silicon microphone, a buzzer, a Wi-Fi antenna, display/touch screen connector, CVBS (reserved interface), UART3 serial port, PWM, 5-way ADC button, and DC power input. The PCB measures 38x38mm, with the complete camera module standing 40mm in height and weighing 30g.


The DIY Camera G1A WiFi Edition (camera mainboard + IMX377 camera module + wifi board) , suitable for 4k action camera, wifi camera, drone camera, industrial cameras, and robot vision cameras.


action camera module          action camera module




2. Specifications


projectParameter DescriptionprojectParameter Description
DSP chipiCatch V39MLens modelHX1812C6 100° lens
Image SensorSONY IMX377（12M）Sensor TypeCMOS
Sensor interfaceMIPIBattery voltage7.4V~7.7V
Effective pixels1200Ten thousandSensor size1/2.3（7.81mm）
Storage TypeExternal TF Card, Support 8G~512G class 10 and The above cards are recommended U3Type-CinterfaceType-C USB 5V；USB Drive Mode; PCCAM Mode
Pixel size
1.55um
Image stabilizationSupports EIS (Electronic Image Stabilization)
Operating temperature-10-+60°CStorage temperature-20-+80°C
humidityHumidity
20%-80%PCBsize38*38MM
Wifi Modules
AW CM256SM
RF Specification
2.4G OR 5G
WLAN Standard
IEEE 802.11b/g/n/ac, WiFi compliant
2.4G Frequency Range
2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band)
5G Frequency Range
4.900 GHz ~ 5.845 GHz (5.0 GHz ISM Band)
2.4G Number of Channels
2.4GHz：Ch1 ~ Ch14
2.4G Transmission Rate2-3M Byte5G Transmission Rate6-8M Byte
2.4G Transmission Distance50 meters (720P & 1M, in open interference-free conditions)5G Transmission Distance30 meters (720P & 1M, in open interference-free conditions)
CVBS (Reserved Interface)720*576PWM3Pin PWM，1PIN APWMP
Video resolution

4K@48/50/60fps(Interpolation)

4K@24/25/30/fps

2.7K@24/25/30/48/50/60fps

1440P@24/25/30/48/50/60fps

1080P@24/25/30/48/50/60/120fps
720P@24/25/30/48/50/60/120/240fps
Photo resolution
20M（5200x3900）(Interpolation)

13M（4160x3120）(Interpolation)

12M（4000x3000）

10M（3648x2736）

8M（3264x2448）

5M（2592x1944）

3M（2048x1536）

2M（1920x1080）

Focal-Length
3.24mm
Total Length
22.5mm
F/NO.
2.7Lens structure4Glasses+2Plastic+1 IR
FOV(D)
100°
FOV(H)
87°
FOV(V)
71°ChiefRay Angle<14.9°<>
TV Distortion
<0.5%<>Relative   Illumination>65%




3. Interface Description


action camera module


IMX377 L1812C6 Camera Module:

IMX377 L1812C6 Camera Module supports capturing 12-megapixel high-resolution photos and recording 4K video at 30FPS. Utilizing an ICM-40607 gyroscope, it enables advanced multi-axis EIS (Electronic Image Stabilization) for enhanced image stability.


USB Type-C Interface:
This interface supports 5V power input per the USB standard, providing power to the camera module and enabling battery charging. When connected to a computer via USB, it allows direct access to files on the TF card (functioning as a mass storage device) and can also operate as a PC camera (USB webcam). Additionally, it reserves one camera control UART3 and one camera debug UART1 serial port (serial port functions require the dedicated G1-USB serial adapter board).


Micro HDMI Interface:
The Micro HDMI interface supports video signal output at up to 4K@30FPS.


action camera module


Battery Interface:
Supports operation via a battery with a voltage range of 6.8V to 8.4V. A high-voltage, high-density lithium battery within 7.4V to 7.7V is recommended for optimal performance.


Fill Light Interface:

Two fill light interfaces are provided for connecting expansion light panels (supporting both white light and IR infrared), enabling auxiliary lighting for the device.


Dual Control Buttons:
Comprises a Power Button (Button A) and a Confirm Button (Button B). The Power Button controls power on/off and mode switching, while the Confirm Button is used for photo capture and video recording.


action camera module


PWM Interface:
This interface provides PWM functionality, allowing control over camera mode switching, photo capture, and video recording.


ADC 5-Way Button:
Supports one ADC 5-way button interface for up, down, left, right, and confirm operations. It enables external button control for powering the camera on and off.


Control Serial Port:
Features RX3 and TX3 lines, enabling camera configuration and control via this UART interface. A CVBS (TV-OUT) analog video output is reserved and available as a customizable option.


DC Power Interface:
Supports 9–24V DC input for automatic camera startup. Allows simultaneous triple power supply from Wi-Fi board DC input, mainboard battery, and Type-C USB, or can operate on any single power source.




Link: https://www.wasintek.com/en/h-pd-142.html


相关产品：
Wasintek Customer Service
Scan to chat on WhatsApp