Wasintek - DIY Camera,Camera Module Customization,ODM Services & Camera Solutions

English

Industrial Wireless Camera One-inch Sensor Camera Module [DIY Camera - G1M WiFi Edition]

1/5

Industrial Wireless Camera One-inch Sensor Camera Module [DIY Camera - G1M WiFi Edition]

QR code

WeChat

copy Link

DIY Camera G1M WiFi Edition - equipped with the iCatch V39M chip and a Sony IMX283 image sensor, supports 4K resolution, 20MP, integrated Wi-Fi, USB, HDMI, a UART serial port, and a DC power interface.

SOC/DSP Main Controller iCatch V39M

Image Sensor IMX283 1" (20M)

Video Recording Resolution 4K 3840*2160 60/50/48/30/25/24p 2.7K 2704*1520 60/50/48/30/25/24p 1080P 1920*1080 120/60/50/48/30/25/24p

Photo Resolution 2000万

Memory Card 4GB - 512GB (Class10/U1/U2/U3)

Lens Parameters HX1117C 102° lens

USB Function USB读卡数据、USB摄像头、USB复用Uart串口

WiFi Function Support 2.4G OR 5G

HDMI Output Support

Display Screen Support

PCB Board Size 38*38mm

Audio Support audio recording function

Scan to chat on What

Detail

DIY Camera - G1M WiFi Edition (Camera Mainboard + IMX283 Camera Module‍ + Wifi Board)

1. Product Overview

The DIY Camera G1M WiFi Edition is equipped with an iCatch V39M camera mainboard, an IMX283 camera module and Wifi Board, interconnected via a board-to-board connector.

This DIY camera system is built around the iCatch V39M chip, supporting H.264 video encoding at up to 4K@60FPS (interpolated), 4K@30FPS, 2.7K@60FPS, and 1080P@120FPS. The camera module utilizes a Sony IMX283 1-inch CMOS sensor with an effective 20-megapixel resolution, paired with a high-quality 7G2P lens offering a 102° field of view. Equipped with the AW CM256SM single-stream dual-band Wi-Fi module, it supports wireless connectivity operating on either the 2.4GHz or 5GHz band.

The board integrates a Type-C interface, HDMI port, TF card slot (supporting up to 512GB), battery interface, two control buttons, a digital silicon microphone, a buzzer, a Wi-Fi antenna, display/touch screen connector, CVBS (reserved interface), UART3 serial port, PWM, 5-way ADC button, and DC power input. The PCB measures 38x38mm, with the complete camera module standing 52mm in height and weighing 57g.

The DIY Camera G1M WiFi Edition (camera mainboard + IMX283 camera module + wifi board) , suitable for industrial wireless camera, WiFi camera, drone camera, industrial cameras, and machine vision cameras.

industrial wireless camera

2. Specifications

project	Parameter Description	project	Parameter Description
DSP chip	iCatch V39M	Lens model	HX1117C Lens
Image Sensor	SONY IMX283（20M）	Sensor Type	CMOS
Sensor interface	MIPI	Battery voltage	7.4V~7.7V
Effective pixels	2000Ten thousand	Sensor size	1' (one inch)
Storage Type	External TF Card, Support 8G~512G class 10 and The above cards are recommended U3	Type-Cinterface	Type-C USB 5V；USB Drive Mode; PCCAM Mode
Pixel size	2.4*2.4um	Image stabilization	Not supported, customizable
Operating temperature	-10-+60°C	Storage temperature	-20-+80°C
humidityHumidity	20%-80%	PCB size	38*38mm
WifiModules	AW CM256SM	RF Specification	2.4G OR 5G
WLAN Standard	IEEE 802.11b/g/n/ac, WiFi compliant	2.4G Frequency Range	2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band)
5G Frequency Range	4.900 GHz ~ 5.845 GHz (5.0 GHz ISM Band)	2.4G Number of Channels	2.4GHz：Ch1 ~ Ch14
2.4G Transmission Rate	2-3M Byte	5G Transmission Rate	6-8M Byte
2.4G Transmission Distance	50 meters (720P & 1M, in open interference-free conditions)	5G Transmission Distance	30 meters (720P & 1M, in open interference-free conditions)
CVBS (Reserved Interface)	720*576	PWM	3Pin PWM，1PIN APWMP
Video resolution	4K@48/50/60fps(Interpolation) 4K@24/25/30fps 2.7K@24/25/30/48/50/60fps 1080P@24/25/30/48/50/60/120fps 720P@24/25/30/48/50/60/120/240fps
Photo resolution	20M（5200x3900） 13M（4160x3120） 12M（4000x3000） 10M（3648x2736） 8M（3264x2448） 5M（2592x1944） 3M（2048x1536） 2M（1920x1080）
Focal-Length	6.6mm	Total Length	30.22mm
F/NO.	2.8	Lens structure	7G2P
FOV(D)	102°	FOV(H)	91.8°
FOV(V)	68°	Relative Illumination	32.8%

3. Interface Description

industrial wireless camera

IMX283 L1117C Camera Module:

IMX283 L1117C Camera Module supports capturing 20-megapixel high-resolution photos and recording 4K video at 30FPS.

USB Type-C Interface:
This interface supports 5V power input per the USB standard, providing power to the camera module and enabling battery charging. When connected to a computer via USB, it allows direct access to files on the TF card (functioning as a mass storage device) and can also operate as a PC camera (USB webcam). Additionally, it reserves one camera control UART3 and one camera debug UART1 serial port (serial port functions require the dedicated G1-USB serial adapter board).

Micro HDMI Interface:
The Micro HDMI interface supports video signal output at up to 4K@30FPS.

industrial wireless camera

Battery Interface:
Supports operation via a battery with a voltage range of 6.8V to 8.4V. A high-voltage, high-density lithium battery within 7.4V to 7.7V is recommended for optimal performance.

Dual Control Buttons:
Comprises a Power Button (Button A) and a Confirm Button (Button B). The Power Button controls power on/off and mode switching, while the Confirm Button is used for photo capture and video recording.

industrial wireless camera

PWM Interface:
This interface provides PWM functionality, allowing control over camera mode switching, photo capture, and video recording.

ADC 5-Way Button:
Supports one ADC 5-way button interface for up, down, left, right, and confirm operations. It enables external button control for powering the camera on and off.

Control Serial Port:
Features RX3 and TX3 lines, enabling camera configuration and control via this UART interface. A CVBS (TV-OUT) analog video output is reserved and available as a customizable option.

DC Power Interface:
Supports 9–24V DC input for automatic camera startup. Allows simultaneous triple power supply from Wi-Fi board DC input, mainboard battery, and Type-C USB, or can operate on any single power source.

Link: https://www.wasintek.com/en/h-pd-159.html