Wasintek - DIY Camera,Camera Module Customization,ODM Services & Camera Solutions

English

Industrial Camera Module 4K IP Camera [DIY Camera - G1A Ethernet Edition]

1/5

Industrial Camera Module 4K IP Camera [DIY Camera - G1A Ethernet Edition]

QR code

WeChat

copy Link

DIY Camera G1A Ethernet Edition - equipped with the iCatch V39M chip and a Sony IMX377 image sensor, supports 4K resolution, 12MP, EIS (Electronic Image Stabilization), Ethernet, USB, HDMI, a UART serial port, and a DC power interface.

SOC/DSP Main Controller iCatch V39M

Image Sensor IMX377 1/2.3 (12M)

Video Recording Resolution 4K 3840*2160 60/50/48/30/25/24p 2.7K 2704*1520 60/50/48/30/25/24p 1080P 1920*1080 120/60/50/48/30/25/24p

Photo Resolution 1200万

Memory Card 4GB - 512GB (Class10/U1/U2/U3)

Anti-shake Function Digital anti-shake, EIS anti-shake

Lens Parameters 100-degree zero-distortion wide-angle lens

USB Function USB读卡数据、USB摄像头、USB复用Uart串口

HDMI Output Support

PCB Board Size 38*38mm

Audio Support recording function

Scan to chat on What

Detail

DIY Camera - G1A Ethernet Edition (Camera Mainboard + IMX377 Camera Module + Ethernet Board）

1. Product Overview

The DIY Camera G1A Ethernet Edition is equipped with an iCatch V39M camera mainboard, an IMX377 camera module and Ethernet Board, interconnected via a board-to-board connector.

This DIY camera system is built around the iCatch V39M chip, supporting H.264 video encoding at up to 4K@60FPS (interpolated), 4K@30FPS, 2.7K@60FPS, and 1080P@120FPS. The camera module utilizes a high-quality SONY IMX377 CMOS sensor with an effective 12-megapixel resolution, paired with a 100-degree distortion-free wide-angle lens, and features multi-axis EIS (Electronic Image Stabilization) for enhanced image stability. Equipped with the IP101GR Ethernet chip, it enables wired network connectivity.

The board integrates a Type-C interface, HDMI port, TF card slot (supporting up to 512GB), battery interface, two control buttons, a digital silicon microphone, a buzzer, Ethernet port, UART3 serial port, PWM, 5-way ADC button, DC power input, and MIPI output (reserved interface).The PCB measures 38x38mm, with the complete camera module standing 40mm in height and weighing 30g.

The DIY Camera G1A Ethernet Edition (camera mainboard + IMX377 camera module + Ethernet board) , suitable for industrial cameras, drone camera, ip cameras, anti-shake cameras, and robot vision cameras.

industrial camera module

2. Specifications

project	Parameter Description	project	Parameter Description
DSP chip	iCatch V39M	Lens model	HX1812C6 100° lens
Image Sensor	SONY IMX377（12M）	Sensor Type	CMOS
Sensor interface	MIPI	Battery voltage	7.4~7.7V
Effective pixels	1200Ten thousand	Sensor size	1/2.3（7.81mm）
Storage Type	External TF Card, Support 8G~512G class 10 and The above cards are recommended U3	Type-Cinterface	Type-C USB 5V；USB Drive Mode; PCCAM Mode
Pixel size	1.55um	Image stabilization	Supports EIS (Electronic Image Stabilization)
Operating temperature	-10-+60°C	Storage temperature	-20-+80°C
humidityHumidity	20%-80%	PCBsize	38*38MM
Ethernet chip	IP101GR	Transmission rate	100M
LED Indicator	Network Operation Status: White LED	PWM	PWM0，PWM1/Uart3_GND
Video resolution	4K@48/50/60fps(Interpolation) 4K@24/25/30/fps 2.7K@24/25/30/48/50/60fps 1440P@24/25/30/48/50/60fps 1080P@24/25/30/48/50/60/120fps 720P@24/25/30/48/50/60/120/240fps
Photo resolution	20M（5200x3900）(Interpolation) 13M（4160x3120）(Interpolation) 12M（4000x3000） 10M（3648x2736） 8M（3264x2448） 5M（2592x1944） 3M（2048x1536） 2M（1920x1080）
Focal-Length	3.24mm	Total Length	22.5mm
F/NO.	2.7	Lens structure	4Glasses+2Plastic+1 IR
FOV(D)	100°	FOV(H)	87°
FOV(V)	71°	ChiefRay Angle	<14.9°<>
TV Distortion	<0.5%<>	Relative Illumination	>65%

3. Interface Description

industrial camera module

IMX377 L1812C6 Camera Module:

IMX377 L1812C6 Camera Module supports capturing 12-megapixel high-resolution photos and recording 4K video at 30FPS. Utilizing an ICM-40607 gyroscope, it enables advanced multi-axis EIS (Electronic Image Stabilization) for enhanced image stability.

USB Type-C Interface:
This interface supports 5V power input per the USB standard, providing power to the camera module and enabling battery charging. When connected to a computer via USB, it allows direct access to files on the TF card (functioning as a mass storage device) and can also operate as a PC camera (USB webcam). Additionally, it reserves one camera control UART3 and one camera debug UART1 serial port (serial port functions require the dedicated G1-USB serial adapter board).

Micro HDMI Interface:
The Micro HDMI interface supports video signal output at up to 4K@30FPS.

industrial camera module

Battery Interface:
Supports operation via a battery with a voltage range of 6.8V to 8.4V. A high-voltage, high-density lithium battery within 7.4V to 7.7V is recommended for optimal performance.

Fill Light Interface:
Two fill light interfaces are provided for connecting expansion light panels (supporting both white light and IR infrared), enabling auxiliary lighting for the device.

Dual Control Buttons:
Comprises a Power Button (Button A) and a Confirm Button (Button B). The Power Button controls power on/off and mode switching, while the Confirm Button is used for photo capture and video recording.

industrial camera module

UART3 Serial Port Interface:
This UART3 serial port allows for camera configuration and control through command input.

Ethernet Interface:
Connect to a computer, router, or video transmission board via Ethernet cable (according to pin definition) for RTSP stream pulling.

DC Power Interface:
Supports 9V-24V DC power input or 8V-16.8V lithium battery power supply, enabling automatic camera startup.

PWM Interface:
This interface provides PWM functionality, allowing control over camera mode switching, photo capture, and video recording.

ADC 5-Way Button:
Supports one ADC 5-way button interface for up, down, left, right, and confirm operations. It enables external button control for powering the camera on and off.

Link: https://www.wasintek.com/en/h-pd-143.html