Wasintek - DIY Camera,Camera Module Customization,ODM Services & Camera Solutions

English

Drone Camera Module Three-Axis Gimbal Camera [DIY Camera - G1E Ethernet Edition]

1/5

Drone Camera Module Three-Axis Gimbal Camera [DIY Camera - G1E Ethernet Edition]

QR code

WeChat

copy Link

DIY Camera G1E Ethernet Edition - equipped with the iCatch V39M chip and a OV OS12D40 image sensor, supports 4K resolution, 11MP, Three-axis gimbal stabilization, Ethernet, USB, HDMI, a UART serial port, and a DC power interface.

SOC/DSP Main Controller iCatch V39M

Image Sensor OV OS12D40

Video Recording Resolution 4K 3840*2160 60/50/48/30/25/24p 2.7K 2704*1520 60/50/48/30/25/24p 1080P 1920*1080 120/60/50/48/30/25/24p

Photo Resolution 1100万

Memory Card 4GB - 512GB (Class10/U1/U2/U3)

Anti-shake Function Gimbal anti-shake

Lens Parameters HX143_004 143° wide-angle lens

USB Function USB读卡数据、USB摄像头、USB复用Uart串口

HDMI Output Support

PCB Board Size 38*38mm

Audio Support recording function

Scan to chat on What

Detail

DIY Camera - G1E Ethernet Edition (Camera Mainboard + Gimbal Camera Module + Ethernet Board)

1. Product Overview

The DIY Camera G1E Ethernet Edition is equipped with an iCatch V39M camera mainboard, an OS12D40 gimbal camera module and Ethernet Board, interconnected via a board-to-board connector.

This DIY camera system is built around the iCatch V39M chip, supporting H.264 video encoding at up to 4K@60FPS (interpolated), 4K@30FPS, 2.7K@60FPS, and 1080P@120FPS. The camera module utilizes a high-quality OV OS12D40 CMOS sensor with an effective 11-megapixel resolution. Featuring the ICM-40607 gyroscope, it supports 3-axis gimbal stabilization. Equipped with the IP101GR Ethernet chip, it enables wired network connectivity.

The board integrates a Type-C interface, HDMI port, TF card slot (supporting up to 512GB), battery interface, two control buttons, a digital silicon microphone, a buzzer, Ethernet port, UART3 serial port, PWM, 5-way ADC button, DC power input, and MIPI output (reserved interface).The PCB measures 38x38mm, with the complete camera module standing 60mm in height and weighing 64g.

The DIY Camera G1E Ethernet Edition (camera maindboard + OS12D40 gimbal camera module + Ethernet board) , suitable for drone camera, robot vision camera, industrial camera, gimbal camera, and ip camera.

drone camera module

2. Specifications

project	Parameter Description	project	Parameter Description
DSP chip	iCatch V39M	Lens model	HX143_004 143° lens
Image Sensor	OV OS12D40 (11M)	Sensor Type	CMOS
Sensor Interface	MIPI	Battery voltage	7.4V~7.7V
Effective pixels	1100Ten thousand	Sensor size	1/2.49'
Storage Type	External TF Card, Support 8G~512G class 10 and The above cards are recommended U3	Type-Cinterface	Type-C USB 5V；USB Drive Mode; PCCAM Mode
Pixel size	1.4um	Image stabilization	3-axis gimbal stabilization
Operating temperature	-10°C-+60°C	Storage temperature	-20-+70°C
PCB size	38*38MM	Module height	60mm
Ethernet chip	IP101GR	Transmission rate	100M
LED Indicator	Network Operation Status: White LED	PWM	PWM0，PWM1/Uart3_GND
Video resolution	4K@48/50/60fps(Interpolation) 4K@24/25/30/fps 2.7K@24/25/30/48/50/60fps 1080P@24/25/30/48/50/60/120fps 720P@24/25/30/48/50/60/120/240fps
Photo resolution	20M（5200x3900）(Interpolation) 13M（4160x3120）(Interpolation) 11M（4512x2512） 8M（3840x2160） 5M（2592x1944） 3M（2048x1536） 2M（1920x1080）
Focal-Length	2.95mm	Total Length	15.89mm
F/NO.	2.0	Lens structure	4G3P+IR
FOV(D)	143°	FOV(H)	125°
FOV(V)	69°	ChiefRay Angle	<19.2°<>
TV Distortion	<-33%<>	Relative Illumination	>66%

3. Interface Description

drone camera module

OV OS12D40 gimbal camera module

OV OS12D40 gimbal camera module supports capturing 11-megapixel high-resolution photos and recording 4K video at 30FPS. Utilizing an ICM-40607 gyroscope, it supports 3-axis gimbal stabilization.

USB Type-C Interface:
When connected to a computer via USB, it allows direct access to files on the TF card (functioning as a mass storage device) and can also operate as a PC camera (USB webcam). Additionally, it reserves one camera control UART3 and one camera debug UART1 serial port (serial port functions require the dedicated G1-USB serial adapter board).

Micro HDMI Interface:
The Micro HDMI interface supports video signal output at up to 4K@30FPS.

drone camera module

Battery Interface:
Supports operation via a battery with a voltage range of 6.8V to 8.4V. A high-voltage, high-density lithium battery within 7.4V to 7.7V is recommended for optimal performance.

Dual Control Buttons:
Comprises a Power Button (Button A) and a Confirm Button (Button B). The Power Button controls power on/off and mode switching, while the Confirm Button is used for photo capture and video recording.

drone camera module

UART3 Serial Port Interface:
This UART3 serial port allows for camera configuration and control through command input.

Ethernet Interface:
Connect to a computer, router, or video transmission board via Ethernet cable (according to pin definition) for RTSP stream pulling.

DC Power Interface:
Supports 9V-24V DC power input or 8V-16.8V lithium battery power supply, enabling automatic camera startup.

PWM Interface:
This interface provides PWM functionality, allowing control over camera mode switching, photo capture, and video recording.

ADC 5-Way Button:
Supports one ADC 5-way button interface for up, down, left, right, and confirm operations. It enables external button control for powering the camera on and off.

Link: https://www.wasintek.com/en/h-pd-150.html