G1-N-V6.3 Ethernet Port Board (IP101GR Ethernet Port Chip) Wired Network Expansion Board

G1-N-V6.3Network port board(IP101GR Network port chip)

1. ProductsOverview

This productCarryingIP101GRNetwork port chip, support expansion network port,PWM, serial port, power supply automatic power-on interface, and reserved MIPI interface.The frame size is38*38mm, must comply with the company's designatedCamera motherboardThis product cannot work alone.

two,Specifications

3. Hardware interface function description

Serial Port (Uart3)Interface definition:

You can input commands through this serial port (Uart3) to set up and control the camera.

Definition of network port and power supply interface:

With G1Camera motherboardThis power supply port supports DC power supply between 9V~24V or lithium battery type between 8V~16.8V to power the camera automatically.

PWM interface definition:

The above interface leads to the PWM function interface, which can be used to control camera mode switching, photo taking, video recording and other functions.

ADC five-way button interface definition:

Supports one ADC button interface, which can be connected to five buttons: up, down, left, right, and confirm. It supports external buttons to control the camera's power on and off.

Accessories list:

Yin and Yang hexagonal copper pillars M2*3.5+3 (5 PCS)
1.0mm pitch 3-pin single-ended cable with hook (2 PCS)
1.0 pitch 5PIN single-ended cable with hook (1 PCS)
1.0 pitch 8-pin single-ended cable with hook (1 PCS)
(Note: Connect wires according to the specifications, ignoring the wire color)

Assembly diagram:

▲（G1-M-V6.2 camera motherboard + IMX377Camera module+ G1-N-V6.3 network port board)

Datasheet download:G1-N-V6.3Network port board(IP101GRNetwork port chip) Specification.pdf‍

Link to this article: http://www.wasintek.com/h-pd-82.html