













G1-IMX258Optical image stabilization camera module (Ms054)
1. Product Overview
G1-IMX258 optical image stabilizationCamera moduleUsing SONY IMX258 (1/3.1") image sensor, color square pixel arrangement, up to 13 million pixels. 1.12UM pixel size. Compatible with G1Camera motherboardIt can support shooting 13M pixel still pictures, and supports up to 4K@60FPS (interpolation), 4K@30FPS video shooting. The world's smallest optical image stabilization camera module can correct slight shake within 4 degrees.Camera motherboardConnectivity facilitates various installation scenarios. Supports optical image stabilization. The module frame measures 19*19mm, and the adapter board PCB measures 17*17mm.

two,regulationGrid Parameters
| project | Parameter Description | project | Parameter Description |
| Product Name | G1-IMX258Optical image stabilization camera module | Lens model | FF-IMX258 117°Optical image stabilizationlens |
| Hardware version | G1 S258 V1.0 | Image stabilization type | OpticsImage Stabilization |
| Image sensor | SONY IMX258(13M) | Sensor Type | CMOS |
| Effective pixels | 1300Ten thousand | Image size | 1/3.1 |
| Pixel size | 1.12one | Operating temperature | -10-+60°C |
humidityHumidity | 20%-80% | Storage temperature | -20-+80°C |
| PCBsize | 17*17mm | PCB screw holes | spacing:13*13mm,diameter:2mm |
Video resolution (withG1 camera motherboard) | 4K@24/25/30fps,4K@48/50/60fps(Insertvalue) 2.7K@24/25/30/48/50/60fps 1080P@24/25/30/48/50/60fps,1080P@120fps(Insertvalue) 720P@24/25/30/48/50/60/120fps,720P@240fps(Insertvalue) | ||
Photo resolution (withG1 camera motherboard) | 20M (5200x3900) (plugvalue) 13M(4208x3120) 12M(4000x3000) 10M(3648x2736) 8M(3264x2448) 5M(2592x1944) 3M(2048x1536) 2M(1920x1080) | ||
| focal lengthFocal Length | 2.35mm | lensTTL Total Length | |
aperture(F/NO.) | 2.4 | MaterialConstruction | 6 elements ,all plastic |
| Diagonal FOV (D) | 117° | Horizontal FOV (H) | 89.5° |
| Vertical FOV (V) | 60° | distortionTV Distortion | <-10.5% |

three,Coaxial seatPINdefinition
PIN | SIGNAL | PIN | SIGNAL |
1 | VCM_GND | 16 | MDN3 |
2 | VCM_GND | 17 | NDP3 |
3 | VCM_3.3V | 18 | AGND |
4 | SDA | 19 | AVDD_2.8V |
5 | SCL | 20 | VCM_3.3V |
6 | PUBLIC_GND | 21 | DGND |
7 | MCN | 22 | MCLK |
8 | MCP | 23 | DGND |
9 | MDN0 | 24 | /RST(NC) |
10 | MDP0 | 25 | PWDN(XCLR) |
11 | MDN1 | 26 | DVDD_1.2V |
12 | MDP1 | 27 | VDDIO_1.8V |
13 | Tool0(NC) | 28 | Reset_N(GPIO) |
14 | MDN2 | 29 | ID(S) |
15 | MDP2 | 30 | DGND |


Accessories list:
IMX258 17*17 ZJB (1pcs)
G1-S ZJB(1pcs)
VHB double-sided tape 15*15mm(1pcs)
Assembly diagram:

▲ (G1-M-V3.0 camera motherboard + IMX258 optical image stabilization camera module)
Datasheet download:G1-IMX258 Optical Image Stabilization Module (Ms054) Specifications.pdf
Link to this article:http://www.wasintek.com/h-pd-65.html